Insulation Company in Burbank — Same-Day Service, Done Right the First Time

✓ Licensed & Insured ⏱ 60-minute response ✓ Free estimates
Call (866) 858-4033
🛡 Licensed & Insured ⏱ 60-minute Response 💲 Upfront Pricing · Free Estimates

Insulation Company in Burbank, CA

Blown in insulation solves a problem most Burbank homeowners know too well: attics and older walls that let San Fernando Valley heat pour in from June through October. We’re Brea Insulation, and we’ve served Burbank since 2014 with blown-in cellulose and fiberglass work tuned to this city’s 1920s bungalows, mid-century tract homes, and everything between. Under the Hollywood Burbank Airport approach corridors, the brief is often as much about sound as temperature, and that’s a job we know cold. Call (866) 858-4033 for a free estimate.

Call (866) 858-4033

Why Burbank Homes Are Different

Burbank’s housing stock spans nearly a century of construction methods, and that changes how insulation gets installed. In Magnolia Park and the Rancho district, you’ll find 1920s and 1930s Spanish Colonials and bungalow cottages with plaster interiors, knob-and-tube-era wall cavities, and original single-pane windows. Those houses leak air relentlessly until someone dense-packs the walls and seals the gaps. Up in the hills and near the airport, post-war tract homes and low apartment buildings from the 1950s and 60s often have shallow attic spaces that cook under summer sun. Burbank sits in the San Fernando Valley, where summer attic temperatures regularly push past 140°F, so the priority here is almost always heat gain and air sealing, not cold protection. Winters are mild and frost is rare, which means R-value alone won’t fix the problem. Add in the fact that homes on the flats sit under flight paths out of Hollywood Burbank Airport, and many of our Burbank jobs blend thermal work with acoustic upgrades: denser materials, careful air sealing, and attention to shared walls and ceilings that neighboring cities simply don’t require.

Our Main Burbank Services

Burbank homeowners call us most about two things: attic spaces that need serious R-value against valley heat, and hard-to-reach cavities that demand spray foam’s air-sealing performance. Both get a local specialist’s eye, informed by this city’s housing stock and noise profile.

Attic Insulation in Burbank

Attic insulation in Burbank is the single highest-return upgrade for summer cooling bills, because attic temperatures in this part of the San Fernando Valley run extreme. In an older Magnolia Park bungalow with a shallow attic, we often find old, compressed fiberglass batts that lost their R-value years ago. We remove what’s failing, air-seal the ceiling plane, and install material matched to the home’s construction era and the homeowner’s cooling load. Whether it’s a 1930s cottage or a hillside mid-century ranch, the job starts with the attic because that’s where Burbank heat enters. Read more on our dedicated Attic Insulation in Burbank page.

Attic Insulation in Burbank

Spray Foam Insulation in Burbank

Spray foam does double duty in Burbank: it insulates and it air-seals in one pass. For homes under the Hollywood Burbank Airport approach corridors, closed-cell foam also adds meaningful sound attenuation to roof decks and exterior walls. We install Icynene and Demilec open- and closed-cell systems, choosing the chemistry based on whether the job is a vented attic retrofit, a crawl space encapsulation, or a new build. In Burbank’s older plaster-walled homes, foam’s ability to fill irregular cavities without demolition is often the difference between a project that’s feasible and one that isn’t. See specifics on our Spray Foam Insulation in Burbank page.

Spray Foam Insulation in Burbank
Need help today?Fast, friendly service and a no-obligation free estimate.

Call (866) 858-4033

What happens when you call

  1. 1
    A real person answersNo phone trees — you reach a local pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched.
  3. 3
    A background-checked tech heads outLicensed & insured, dispatched right away.
  4. 4
    You approve before work beginsNothing starts until you say go.

Blown In Insulation in Burbank

Blown In Insulation in Burbank

Blown in insulation is the workhorse retrofit for Burbank’s older homes. In the 1920s-40s cottages around Magnolia Park and the Rancho district, dense-packed cellulose can fill wall cavities that were never insulated at all, and blown-in attic top-ups bring R-value up fast in the tract homes and low apartment buildings near the airport. Our Blown In Insulation service covers both fiberglass and cellulose, matched to the cavity and the goal, whether that’s heat control, sound deadening under a flight path, or both.

Cellulose Insulation

Signs you need it

Your heating and cooling bills climb every summer while certain rooms stay noticeably warmer than the rest of the house, especially rooms facing west or sitting directly under an uninsulated attic.

What it costs in Burbank

Blown-in cellulose in Burbank typically runs $1.20 to $2.70 per square foot installed, with attic top-ups on the lower end and dense-pack wall work on the higher end.

How we do it

We drill access holes into wall cavities or blow directly into the attic floor, using a dense-pack or loose-fill technique matched to the cavity, then patch and finish the openings so the house looks untouched.

Blown In Attic Insulation

Signs you need it

Your attic floor has old, flattened batts or bare spots, and rooms on the top floor heat up fast by mid-morning.

What it costs in Burbank

Blown-in attic insulation in Burbank generally runs $1,500 to $3,400 for a typical 1,000-1,500 square foot attic, material and labor included.

How we do it

We air-seal the ceiling plane first, then blow loose-fill fiberglass or cellulose to the target R-value using a calibrated machine, taking care around recessed lights and vent baffles.

What Blown In Insulation Costs in Burbank

Item Typical range in Burbank
Blown-in attic top-up (1,000-1,500 sq ft attic) $1,500 – $3,400
Dense-pack wall insulation (per square foot of wall) $1.20 – $2.70
Whole-house attic + wall retrofit $4,000 – $8,500

Can blown in insulation reduce airplane noise in Burbank?

Dense-packed cellulose in walls and ceilings can measurably reduce sound transmission from the Hollywood Burbank Airport flight paths, especially when paired with air sealing. It won’t block low-frequency rumble entirely, but it takes the edge off. Call (866) 858-4033 for a site-specific assessment.

Is blown in insulation worth it in a Burbank summer?

Yes. Burbank’s summer attic heat is the primary driver of cooling costs, and blown-in insulation directly slows that heat gain. Most Burbank homes we retrofit see a noticeable comfort change the first summer. Call (866) 858-4033 for an exact quote, free of charge.

Brands We Service in Burbank

We install GreenFiber cellulose, Owens Corning and Johns Manville fiberglass, and Demilec spray foam in Burbank, and we stock parts and materials for all of them locally, so most jobs move from estimate to install within a week. Having eight manufacturer lines on our brands bench means the material gets matched to the house, not to what’s easiest to order.

Pricing for Insulation Company in Burbank, CA

Service Typical range in Burbank
Blown-in attic top-up $1,500 – $3,400
Dense-pack wall insulation $1.20 – $2.70 per sq ft
Whole-house attic + wall retrofit $4,000 – $8,500
Spray foam attic (open-cell) $2.00 – $4.00 per sq ft
Spray foam attic (closed-cell) $3.00 – $6.00 per sq ft
Attic batt insulation (new install) $1,800 – $4,200
Attic batt insulation (removal + replacement) $3,500 – $7,500
Crawl space encapsulation with spray foam $3,000 – $6,500
Wall cavity injection foam $2.50 – $5.00 per sq ft

Two things push price up in Burbank more than anything else. One is limited attic access in the 1920s-40s bungalow stock, which slows the install. The other is sound-deadening work under the airport approach corridors, which adds density and air-sealing hours on top of the base insulation job. We quote an upfront price before we start, and it’s the price you pay.

Neighborhoods We Serve in Burbank

We work across Burbank’s flats and hills, from the older cottages of Magnolia Park to the mid-century tracts up near the airport. Most neighborhoods see a response within 24 to 48 hours, with same-day attic assessments often available on weekdays.

  • Magnolia Park
  • Rancho District
  • Burbank Hills
  • North Burbank (airport corridor)
  • Downtown Burbank

Service Area – Cities Near Burbank

Our Burbank crews also cover the surrounding cities, where the housing stock and heat profile are similar. We serve Universal City, CA, North Hollywood, CA, Glendale, CA, and Studio City, CA. If you’re in one of these areas and need an insulation specialist who knows the valley’s older homes, call us and we’ll get it scheduled.

Serving Burbank, CA — Our Local Coverage Area

We’re based in the Burbank area and know this community well. Use the map below to see our service coverage — if you’re nearby, we can almost certainly help.

FAQs About Insulation Company in Burbank

Ready to get started? Free estimates · 60-minute response in Burbank
Call (866) 858-4033

What happens when you call

  1. 1
    A real person answersNo phone trees — talk to a local insulation pro.
  2. 2
    You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
  3. 3
    A background-checked tech heads outLicensed & insured, typically within 60-minute.
  4. 4
    You approve before work beginsNothing starts until you say go.

What Burbank Customers Say

★★★★★ 5.0 from 4+ reviews

"Found and sealed a gap around the chimney chase that was basically an open chimney to the attic."

— Darius Grant

"Installed baffles at the soffits so the new insulation didn't block the ventilation, which the previous contractor apparently never considered."

— Marisol Vargas

"Told me the crawlspace didn't need doing and only the attic did. Half the job, half the money."

— Kelly Reed

How It Works in Burbank

Getting your insulation handled is simple and fast.

1

Call or Request a Free Estimate

Tell us about your insulation needs and we provide an upfront, transparent quote — no obligation, no hidden fees.

2

Licensed Technician Dispatched

A background-checked, certified technician arrives in Burbank — typically within 30–60 minutes, with parts stocked on the truck.

3

Problem Solved, Guaranteed

We complete the job to your full satisfaction, backed by our warranty and 100% satisfaction guarantee.

Request a Free Estimate

Tell us what's going on in Burbank — we'll get back to you fast. No obligation.

When you submit this form, you accept our Privacy Policy and agree that you may be contacted via phone, email, or SMS about your request, including by the independent contractors we may refer it to.

Prefer to text? Send a Text
Call Now - 24/7 Dispatch
Areas We Serve
Call Now - 24/7 Dispatch